Fawn Foot Pattern REPLACEMENT AXE HANDLES are designed to fit older English axes from makers such as Elwell, Brades and Gilpin.

Made from premium quality American Hickory with a fawn foot pattern swell knob. Hickory is widely considered to be the most suitable wood for axe handles.

Handle sizes 24" and above are supplied with a both a single wooden wedge and a steel wedge. Handle sizes 12" - 16" are supplied with just a wooden wedge.

Made from premium quality American Hickory.

Sizes available:

• 12″ (300mm), to fit an eye that is approx 38mm x 13mm
• 14″ (350mm), to fit an eye that is approx 38mm x 13mm
• 16″ (400mm), to fit an eye that is approx 45mm x 13mm
• 24″ (600mm), to fit an eye that is approx 55mm x 19mm
• 30″ (760mm), to fit an eye that is approx 62mm x 21mm
• 36″ (920mm), to fit an eye that is approx 60mm x 18mm
• 36″ (920mm), to fit an eye that is approx 65mm x 23mm
• 36″ (920mm), to fit an eye that is approx 79mm x 18mm
• 36″ (920mm), to fit an eye that is approx 90mm x 22mm

SELECT FROM THE DROP-DOWN BOX ABOVE

The hardwood wedge supplied will span the full width of the handles eye-wood and sometimes a bit more so will almost certainly need adjusting to fit. The species of the wooden wedge may vary but usually oak.

Finished with a light wax, may require a light sanding when fitted.

Always glue wooden wedges in place.

Fawn Foot Pattern REPLACEMENT AXE HANDLES are made in the UK.